Landscape Photo Hobby Famous Landscape Photographers

Athletics Baseball

what are the rules and regulations in softball,baseball,athletics?pls help me for my report….?

all rules and regulations for these three not only baseball

I am not sure what athleti is but the softball rules are
Gameplay
A softball game consists of at least 7 innings. In each inning, each team bats until three batters have been put out (see below). The teams take turns batting. Officially, which team bats first is decided by a coin toss,[2] although a league may decide otherwise at its discretion. The most common rule is that the home team bats second. Batting second is advantageous.

In the event of a tie, extra innings are usually played until the tie is broken. If the home team is leading and the road team has just finished its half of the seventh inning, the game ends because it is not necessary for the home team to bat again.

In all forms of softball, the defensive team is the fielding team; the offensive team is at bat or batting and is trying to score runs.

[edit]
Pitching
The Play begins with the umpire saying “Play Ball”. After the batter is ready and all fielders (except the catcher) are in fair territory, the pitcher stands at the pitching plate and attempts to throw the ball past the batter to the catcher behind home plate. The throw, or pitch, must be made with an underarm motion: the ball must be released below the hip when the hand is no farther from the hip than the elbow.

The pitcher tries to throw the ball so that it passes through the strike zone. However, in advance play a highly-skilled pitcher may deliberately pitch a ball outside the strike zone if she believes the batter is likely to swing. In other instances, such as when an extremely powerful hitter comes up to bat and they are followed by a weaker hitter, a pitcher may deliberately walk the first batter based on the calculation that the next batter will be an easy out. The strike zone is slightly different in different forms of softball. A pitch that passes through that zone is a strike. A pitch that the batter swings at is also a strike, as is any hit ball that lands in foul territory (unless it is fast pitch and two strikes have already been called).

A pitch which is not a strike and which the batter does not swing at is a ball. The number of balls and strikes is called the count. The number of balls is always given first, as 2 and 1, 2 and 2, and so on. A count of 3 and 2 is a full count, since the next ball or strike will end the batter’s turn at the plate, unless the ball goes foul.

If the ball lands foul, it is a dead ball and no plays may be made until the pitcher receives the ball again, and the home plate umpire says, “Play ball.”

Various illegal acts done by the pitcher, such as leaping or crow-hopping result in a ball being awarded to the batter, and any runners on base advancing to the next base.

[edit]
Batting

A batter at readyThe offensive team sends one batter at a time to home plate to use the bat to try to hit the pitch forward into fair territory. The order the players bat in, known as the batting order, must stay the same throughout the game. Substitutes and replacements must bat in the same position as the player they are replacing. In co-ed, male and female batters must alternate.

The batter stands facing the pitcher inside a batter’s box (there is one on each side of the plate). The bat is held with both hands, over the shoulder away from the pitcher. The ball is usually hit with a full swinging motion in which the bat may move through more than 360 degrees. The batter usually steps forward with the front foot and swings the bat.

Once the ball is hit into fair territory the runner must try to advance to first base or beyond. While running to first base, the batter is a batter-runner. When she safely reached first (see below) she becomes a base-runner or runner.

If four balls are called, then it is a walk. The batter gets to walk to first and if there is a runner on first the runner gets to advance to second.

A batted ball hit high in the air is a fly ball. A fly ball hit upward at an angle greater than 45 degrees is a pop fly. A batted ball driven in the air through the infield at a height at which an infielder could play it if in the right position is a line drive. A batted ball which hits the ground within the diamond is a ground ball. If a batted ball hits a player or a base it is considered to have hit the ground.

[edit]
Getting the batter out
The batter is out if: three strikes are called (a strikeout); a ball hit by the batter is caught before touching the ground (a flyout); the batter is touched by the ball or by a glove holding the ball while the batter is away from a base (tagged); a fielder holding the ball touches a base which is the only base towards which the batter may run before the batter arrives there (a force out or force play); or in certain special circumstances.

The most common type of force play is made at first base. A batter that drives a ball forward into fair territory must run to first base. If the ball is thrown to first base (that is, to a fielder standing on first base and is holding the ball) before the batter can reach it, the batter is out. A double play is when two runners are put out during a single continuous action; a triple play is when three runners are put out.

In co-ed slow pitch, teams must alternate male and female batters. If a team is, for whatever reason, unable to do this, an out is recorded wherever two players of the same gender bat back-to-back. The missing player is recorded as being “put out.”

[edit]
Advancing around the bases
If the player hits the ball and advances to a base without a fielding error or an out being recorded, then that is called a base hit. The bases must be reached in order counterclockwise, starting with first base. After hitting the ball the batter may advance as many bases as possible. An advance to first base on the one hit is a single, to second base is a double, to third base is a triple, and to home plate is a home run. Home runs are usually scored by hitting the ball over the outfield fence, but may be scored on a hit which does not go over the fence. A home run includes any ball that bounces off a fielder and goes over the fence in fair-territory or that hits the foul pole. If a batted ball, bounces off a fielder and goes over the fence in foul territory, hits the fence, a fielder, and then goes over, or if it goes over the fence at a location that is closer than the official distance, the batter is awarded a double instead.

If a runner becomes entitled to the base where another runner is standing, the latter runner must advance to the next base. For example, if a player hits the ball and there is a runner on first, the runner on first must try to advance to second because the batter-runner is entitled to first base. If the batter reaches first base without being put out, then that player can then be forced to run towards second base the next time a ball is driven into fair territory. That is because the player must vacate first base to allow the next batter to reach it, and consequently can only go to second base, where a force out may be recorded.

Runners may advance at risk to be put out: on a hit by another player; after a fly ball has been caught, provided the player was touching a base at the time the ball was caught or after; or automatically, when a pitch is delivered illegally; or on an error by a fielder.

Runners advance without liability to be put out: when a walk advances another player to the runner’s current base; or automatically in certain special circumstances described below.

[edit]
Special circumstances
If there is a wild throw in which the ball goes out of the designated play area, each runner is awarded the base they were going to, plus one extra base.

In fast pitch, runners may try to get a stolen base by running to the next base on the pitch and reaching it before being tagged with the ball. Until recently, stealing was forbidden in slow pitch because a runner would get a huge head start while the slow pitch is making its way to the batter. As a result of rule changes initiated by the Independent Softball Association which later made its way to the Amateur Softball Association and the International Softball Federation in the 21st century, most levels of slow pitch permit stealing bases, provided the runner starts when the ball either touches the ground or crosses the plate. This rule encourages pitchers to be more responsible with the pitch and catchers to play defense, as balls which miss the catcher are now grounds to have stolen bases.

No matter what level of play, all baserunners must keep one foot on a base until the pitcher throws the ball.

In fast pitch, if the catcher drops strike three (a passed ball) with less than two outs, the batter can attempt to run to first base if first base is unoccupied. The catcher must then attempt to throw the ball to first base ahead of the runner. If he or she cannot, the runner is safe. With two outs, the batter can attempt to run to first whether or not it is already occupied.

A foul ball with two strikes on the batter means the batter is out in slow pitch only.

[edit]
Scoring runs
A run is scored when a player has touched all four bases in order, proceeding counterclockwise around them. They need not be touched on the same play; a batter may remain safely on a base while play proceeds and attempt to advance on a later play.

A run is not scored in these circumstances:

If the last out of the inning is a force out
If the last out of an inning is a flyout
[edit]
Ending the game
The team with the most runs after seven innings wins the game. The last (bottom) half of the seventh inning or any remaining part of the seventh inning is not played if the team batting second is leading.

If the game is tied, play usually continues until a decision is reached, by using the international tie-breaker rule. Starting in the top of the eighth inning, the batting team starts with a base-runner on second base, which is the player who made the third out in the previous inning.

In games where one team leads by a large margin, the mercy rule may come into play in order to avoid embarrassing weaker teams. In fast pitch and modified pitch, a margin of 20 runs after three innings, 15 after four, or 10 after five is sufficient for a win to be declared for the leading team. In slow pitch, the margin is 20 runs after four innings or 15 after five innings. In the NCAA, the required margin after 5 innings is 8 runs. The mercy rule takes effect at the end of an inning. Thus, if the team batting first is ahead by enough runs for the rule to come into effect, the team batting second is given their half of the inning to try and narrow the margin.

A game may be lost due to a forfeit. A score of 7-0 for the team not at fault is recorded. A forfeit may be called due to any of these circumstances: if a team does not show up to play; if one side refuses to continue play; if a team fails to resume play after a suspension of play ends; if a team uses tactics intended to unfairly delay or hasten the game; if a player removed from the game does not leave within one minute of being instructed to do so; if a player that cannot play enters the game and one pitch has been thrown; if a team does not have, for whatever reason, enough players to continue; or if after warning by the umpire, a player continues to intentionally break the rules of the game. This last rule is rarely enforced as players who break rules after being warned are usually removed.

The plate umpire may suspend play because of darkness or anything that puts players or spectators in danger. If five innings have been played, the game is recorded as it stands. This includes ties. If fewer than four innings have been played, the game is not considered a regulation game.

Games that are not regulation or are regulation ties are replayed from the point of suspension. If it is a championship game, it is replayed from the beginning. Team rosters may be changed.

Other sanctioning bodies of softball are NSA[3], PONY[4], ASA[5], and USSSA.

[edit]
Modification of rules
One reason for the popularity of softball is the ease of modification of the rules, thereby allowing the game to be adapted to a variety of skill levels. For example, in some slow pitch softball leagues a batter starts at bat with a count of one ball one strike. In some leagues, the number of home runs that can be hit by a team are limited. In other leagues, stealing of bases is prohibited.

Some leagues require teams to use limited flight softballs. These softballs, when hit, will not go as far as regular softballs. Other leagues limit the number of runs which can be scored in an inning. Five is a common limit.

By allowing these and other modifications, softball can be enjoyed by children, teenagers, and adults. Senior leagues with players over the age of 60 are not uncommon.

An example of a rule modification is the “offensive pitcher” (or “self pitch”) often found in informal games where the emphasis is on the social rather than the competitive aspects of the game. The pitcher aids the batter by attempting to give the easiest pitch to hit. There are no walks, and a batter is normally given a fixed number of pitches to attempt to hit (usually 3 or 4). The batter is considered to strike out if she fails to hit the ball into fair territory after the given number of pitches. The pitcher does not act as a fielder, and a rule is often made that if a batted ball touches the pitcher, the batter is out.

[edit]
Indoor play
Despite the fact that it was originally intended to be played indoors, softball is usually played outdoors. The indoor form is sometimes called Arena Softball. It is most similar to slow pitch. There are no “official” rules for the indoor form, but some general conventions are given below.

Only the wall behind the batter is considered foul territory. The other walls are considered fair. If a ball hits a wall and is caught before it lands, the batter flies out. Usually, there is a small area on one of the walls that results in a home run being awarded if the batted ball hits it.

Pitching is generally of the slow form. The count starts at 1 ball, 1 strike.

The placement of the fielders is different. The pitcher also acts as the second baseman. There is no catcher.

There is no limit to the number of batters a team may have available.

and baseball are

Gameplay
A simplified version of the rules of baseball is at simplified baseball rules. The complete Official Rules can be found at www.mlb.com, the official web site of Major League Baseball in the United States.

General structure

Diagram of a baseball diamond.Baseball is played between two teams of nine players each on a baseball field, under the authority of one or more officials, called umpires. There are usually four umpires in major league games; up to six (and as few as one) may officiate depending on the league and the importance of the game. There are four bases. Numbered counter-clockwise, first, second and third bases are cushions (sometimes informally referred to as bags) shaped as 15 in (38 cm) squares which are raised a short distance above the ground; together with home plate, the fourth “base,” they form a square with sides of 90 ft (27.4 m) called the diamond. Home base (plate) is a pentagonal rubber slab known as simply home. The field is divided into two main sections:

The infield, containing the four bases, is for defensive and offensive purposes bounded by the foul lines and the grass line (see figure). However, the infield technically consists of only the area within the bases, including the foul lines.
The outfield is the grassed area beyond the infield grass line (for general purposes; see above under infield), between the foul lines, and bounded by a wall or fence. Again, there is a technical difference; properly speaking, the outfield consists of all fair ground beyond the square of the infield and its bases. The area between the foul lines, including the foul lines (the foul lines are in fair territory), is fair territory, and the area outside the foul lines is foul territory.
The game is played in nine innings (although it can be played with fewer, such as it is in little league games) in which each team gets one turn to bat and try to score runs while the other pitches and defends in the field. An inning is broken up into two halves in which the away team bats in the top (first) half, and the home team bats in the bottom (second) half. In baseball, the defense always has the ball — a fact that differentiates it from most other team sports. The teams switch every time the defending team gets three players of the batting team out. The winner is the team with the most runs after nine innings. If the home team is ahead after the top of the ninth, play does not continue into the bottom half. In the case of a tie, additional innings are played until one team comes out ahead at the end of an inning. If the home team takes the lead anytime during the bottom of the ninth or of any inning thereafter, play stops and the home team is declared the winner.

A batter follows through after swinging at a pitched ball.The basic contest is always between the pitcher for the fielding team, and a batter. The pitcher throws—pitches—the ball towards home plate, where the catcher for the fielding team waits (in a crouched stance) to receive it. Behind the catcher stands the home plate umpire. The batter stands in one of the batter’s boxes and tries to hit the ball with a bat. The pitcher must keep one foot in contact with the top or front of the pitcher’s rubber—a 24″ x 6″ (~ 61 cm x 15 cm) plate located atop the pitcher’s mound—during the entire pitch, so he can only take one step backward and one forward in delivering the ball. The catcher’s job is to receive any pitches that the batter does not hit and to “call” the game by a series of hand movements that signal to the pitcher what pitch to throw and where. If the pitcher disagrees with the call, he will “shake off” the catcher by shaking his head; he accepts the sign by nodding. The catcher’s role becomes more crucial depending on how the game is going, and how the pitcher responds to a given situation. Each pitch begins a new play, which might consist of nothing more than the pitch itself.

Each half-inning, the goal of the defending team is to get three members of the other team out. A player who is out must leave the field and wait for his next turn at bat. There are many ways to get batters and baserunners out; some of the most common are catching a batted ball in the air, tag outs, force outs, and strikeouts. After the fielding team has put out three players from the opposing team, that half of the inning is over and the team in the field and the team at bat switch places; there is no upper limit to the number that may bat in rotation before three outs are recorded. Going through the entire order in an inning is referred to as “batting around”. It is indicative of a high scoring inning. A complete inning consists of each opposing side having a turn (three outs) on offense.

The goal of the team at bat is to score more runs than the opposition; a player may do so only by batting, then becoming a base runner, touching all the bases in order (via one or more plays), and finally touching home plate. To that end, the goal of each batter is to enable baserunners to score or to become a baserunner himself. The batter attempts to hit the ball into fair territory—between the baselines—in such a way that the defending players cannot get them or the baserunners out. In general, the pitcher attempts to prevent this by pitching the ball in such a way that the batter cannot hit it cleanly or, ideally, at all.

A baserunner who successfully touches home plate after touching all previous bases in order scores a run. In an enclosed field, a fair ball hit over the fence on the fly is normally an automatic home run, which entitles the batter and all runners to touch all the bases and score. A home run hit with all bases occupied (‘bases loaded’) is called a grand slam.

Fielding team
See also: Baseball positions and Baseball positioning
The squad in the field is the defensive team; they attempt to prevent the baserunners from scoring. There are nine defensive positions, however, only two of the positions have a mandatory location (pitcher and catcher), the locations of the other seven fielders is not specified by the rules, except that at the moment the pitch is delivered they must be positioned in fair territory and not in the space between the pitcher and the catcher. These fielders often shift their positioning in response to specific batters or game situations, and they may exchange positions with one another at any time. The nine positions most commonly used are: pitcher, catcher, first baseman, second baseman, third baseman, shortstop, left fielder, center fielder, and right fielder. Note that, in rare cases, teams may use dramatically differing schemes, such as switching an outfielder for an infielder. Scorekeepers label each position with a number starting with the pitcher (1), catcher (2), first baseman (3), second baseman (4), third baseman (5), shortstop (6), left fielder (7), center fielder (8), right fielder (9). This convention was established by Henry Chadwick. The reason the shortstop seems out of order has to do with the way fielders positioned themselves in the early years of the game.

The battery
The battery is composed of the pitcher, who stands on the rubber of the mound, and the catcher, who squats behind home plate. These are the two fielders who always deal directly with the batter on every pitch, hence the term “battery”, coined by Henry Chadwick and later reinforced by the implied comparison to artillery fire.

The pitcher’s main role is to pitch the ball toward home plate with the goal of getting the batter out. Pitchers also play defense by fielding batted balls, covering bases (for a potential tag out or force out on an approaching runner), or backing up throws. The catcher’s main role is to receive the pitch if the batter does not hit it. Together with the pitcher and coaches, the catcher plots game strategy by suggesting different pitches and by shifting the starting positions of the other fielders. Catchers are also responsible for defense in the area near home plate.

The infielders
The four infielders are the first baseman, second baseman, shortstop, and third baseman. Originally the first, second and third basemen played very near their respective bases, and the shortstop generally played “in” (hence the term), covering the area between second, third, and the pitchers box, or wherever the game situation required. As the game evolved, the fielding positions changed to the now-familiar “umbrella”, with the first and third baseman generally positioned a short distance toward second base from their bases, the second baseman to the right side of second base standing farther away from the base than any other infielder, and the shortstop playing to the left of second base, as seen from the batter’s perspective, filling in the gaps.

The first baseman’s job consists largely of making force plays at first base on ground balls hit to the other infielders. When an infielder picks up a ball from the ground hit by the batter, he must throw it to the first baseman who must catch the ball and maintain contact with the base before the batter gets to it for the batter to be out. The need to do this quickly often requires the first baseman to stretch one of his legs to touch first base while catching the ball simultaneously. The first baseman must be able to catch the ball very well and usually wears a specially designed mitt. The first baseman also fields balls hit near first base. The first baseman also has to receive throws from the pitcher in order to tag runners out who have reached base safely. The position is less physically challenging than the other positions, but there is still a lot of skill involved. Infielders don’t always make good throws to first base, so it is the first baseman’s job to field any ball thrown toward him cleanly. Older players who can no longer fulfill the demands of their original positions also often become first basemen. The second baseman covers the area to the first-base side of second base and provides backup for the first baseman in bunt situations. He also is a cut-off for the outfield. This is when the outfielder doesn’t have to throw the full distance from him/her to the base, but just to the cut-off. The shortstop fills the critical gap between second and third bases—where right-handed batters generally hit ground balls—and also covers second or third base and the near part of left field. This player is also a cut-off for the outfield. This position is the most demanding defensively, so a good shortstop doesn’t need to necessarily be a good batter. The third baseman’s primary requirement is a strong throwing arm, in order to make the long throw across the infield to the first baseman. Quick reaction time is also important for third basemen, as they tend to see more sharply hit balls than the other infielders, thus the nickname for third base as the “hot corner.”

The outfielders
The three outfielders, left fielder, center fielder, and right fielder, are so named from the catcher’s perspective looking out onto the field. The right fielder generally has the strongest arm of all the outfielders due to the need to make throws on runners attempting to take third base. The center fielder has more territory to cover than the corner outfielders, so this player must be quick and agile with a strong arm to throw balls in to the infield; as with the shortstop, teams tend to emphasize defense at this position. Also, the center fielder is considered the outfield leader, and left- and right-fielders often cede to his direction when fielding fly balls. Of all outfielders, the left fielder often has the weakest arm, as they generally do not need to throw the ball as far in order to prevent the advance of any baserunners. The left fielder still requires good fielding and catching skills, and tends to receive more balls than the right fielder due to the fact that right-handed hitters, who are much more common, tend to “pull” the ball into left field. The left fielder also backs up third base on pick-off attempts from the catcher of from the Pitcher to a base player [first baseman, second baseman or even third baseman]

Defensive strategy

Pitching

The typical motion of a pitcherMain article: Pitching
Effective pitching is vitally important to a baseball team, as pitching is the key for the defensive team to retire batters and to preventing runners from getting on base. A full game usually involves over one hundred pitches thrown by each team. However, most pitchers begin to tire before they reach this point. In previous eras, pitchers would often throw up to four complete games (all nine innings) in a week. With new advances in medical research and thus a better understanding of how the human body functions and tires out, starting pitchers tend more often to throw fractions of a game (typically 6 or 7 innings depending on their performance) about every five days (though a few complete games do still occur each year).

Multiple pitchers are often needed in a single game, including the starting pitcher and relief pitcher(s). Pitchers are substituted for one another like any other player (see below), and the rules do not limit the number of pitchers that can be used in a game; the only limiting factor is the size of the squad, naturally. In general, starting pitchers are not used in relief situations except sometimes during the post-season when every game is vital. If a game runs into many extra innings, a team may well empty its bullpen. If it then becomes necessary to use a “position player” as a pitcher, major league teams generally have certain players pre-designated as emergency relief pitchers, to avoid the embarrassment of using a less skillful player. In baseball’s early years, squads were smaller, and relief pitchers were relatively uncommon, with the starter normally remaining for the entire game unless he was either thoroughly ineffective or became injured; today, with a much greater emphasis on pitch count (100 being the “magic number” in general), over the course of a single game each team will frequently use from two to five pitchers. In the 2005 ALCS, all four of the Chicago White Sox victories were complete games by the starters, a highly noteworthy event in the modern game.

Although a pitcher can only take one step backward and one forward, he has to step off the mound to throw over to first base if he is a right handed pitcher. While delivering the ball, the pitcher has a great arsenal at his disposal in the variation of location, velocity, movement, and arm location (see types of pitches). Most pitchers attempt to master two or three types of pitches; some pitchers throw up to 6 types of pitches with varying degrees of control. Common pitches include a fastball, which is the ball thrown at high speed; a curveball, which is made to curve by rotation imparted by the pitcher; and a change-up, which seeks to mimic the delivery of a fastball but arrives at significantly lower velocity.

To illustrate pitching strategy, consider the “fastball/change-up” combination: The average major-league pitcher can throw a fastball around 90 miles per hour (145 km/h), and a few pitchers have even exceeded 100 miles per hour (161 km/h). The change-up is thrown somewhere between 75 to 85 miles per hour (121 to 137 km/h). Since the batter’s timing is critical to hitting a pitch, a batter swinging to hit what looks like a fastball, would be terribly fooled (swing and miss, hopefully) when the pitch turns out to be a much slower change-up.

Some pitchers choose to throw using the ‘submarine style,’ a very efficient sidearm or near-underhand motion. Pitchers with a submarine delivery are often very difficult to hit because of the angle and movement of the ball once released. Walter Johnson, who threw one of the fastest fastballs in the history of the game, threw sidearm (though not submarine) rather than a normal overhand. True underhanded pitching is not illegal in Major League Baseball. However, it is difficult to generate enough velocity and movement with the underhand motion.

Fielding strategy
Only the pitcher’s and catcher’s locations are fixed, and then only at the beginning of each pitch. Thus, the players on the field move around as needed to defend against scoring a run. Many variations of this are possible, as location depends upon the situation. Circumstances such as the number of outs, the count (balls and strikes) on the batter, the number and speed of runners, the ability of the fielders, the ability of the pitcher, the type of pitch thrown, and the inning cause the fielders move to more strategic locations on the field. Common defensive strategies include: playing for the bunt, trying to prevent a stolen base, moving to a shallow position to throw out a runner at home, playing at “double play depth”, and moving fielders to locations where hitters are most likely to hit the ball.

Team at bat

Batters and runners
The ultimate goal of the team at bat is to score runs. To accomplish this feat, the team at bat successively (in a predetermined order called a lineup or batting order) sends its nine players to the batter’s box (adjacent to home plate) where they become batters. (Each team sets its batting lineup at the beginning of the game. Changes to the lineup are tightly limited by the rules of baseball and must be communicated to the umpires, who have the substitutions announced for the opposing team and fans. See Substitutions below.)

A batter’s turn at the plate is called a plate appearance or an “at-bat.” Batters advance to the bases in a variety of ways: hits, walks, hit-by-pitch, and a few others. When the batter hits a fair ball, he must run to first base, and may continue or stop at any base unless he is put out. A successful hit occurs when the batter reaches a base: reaching only first base is a single; reaching second base, a double; third base, a triple; and a hit that allows the batter to touch all bases in order on the same play is a home run, whether or not the ball is hit over the fence. Once a runner is held to a base, he may attempt to advance at any time, but is not required to do so unless the batter or another runner displaces him (called a force play). A batter always drops his bat when running the bases— otherwise, the bat would slow him down and could give rise to a call of fielder to catch it on its descent. A line drive is like a fly ball, but the ball is hit with such force that its trajectory seems level to the ground. A batted ball which is not hit into the air, and which touches the ground within the infield before it can be caught, is called a ground ball. When a ball is hit outside the foul line, it is a foul ball, requiring the batter and all runners to return to their respective bases.

Once the batter and any existing runners have all stopped at a base or been put out, the ball is returned to the pitcher, and the next batter comes to the plate. After the opposing team bats in its own order and three more outs are recorded, the first team’s batting order will continue again from where it left off.

When a runner reaches home plate, he scores a run and is no longer a base runner. He must leave the playing area until his spot in the order comes up again. A runner may only circle the bases once per plate appearance and thus can score no more than a single run.

Batting

Seven-time MVP Barry Bonds just after swinging at a pitchMain article: Batting (baseball)
Each plate appearance consists of a series of pitches, in which the pitcher throws the ball towards home plate while a batter is standing in the batter’s box. With each pitch, the batter must decide whether or not to swing the bat at the ball in an attempt to hit it. The pitches arrive quickly, so the decision to swing must be made in less than a tenth of a second, based on whether or not the ball is hittable and in the strike zone, a region defined by the area directly above home plate and between the hollow beneath the batter’s knee and the midpoint between the top of the shoulders and the top of the uniform pants. In addition to swinging at the ball, a batter who wishes to put the ball in play may hold his bat over home plate and attempt to tap a pitch lightly; this is called a bunt. Good bunting technique has been described as “catching the ball with the bat.”

On any pitch, if the batter swings at the ball and misses, he is charged with a strike. If the batter does not swing, the home plate umpire judges whether or not the ball passed through the strike zone. If the ball, or any part of it, passed through the zone, it is ruled a strike; otherwise, it is called a ball. The number of balls and strikes thrown to the current batter is known as the count; the count is always given balls first (except in Japan, where it is reversed), then strikes (such as 3-2 or “three and two”, also known as a “full count,” which would be 3 balls and 2 strikes).

If the batter swings and makes contact with the ball, but does not put it in play in fair territory—a foul ball—he is charged with an additional strike, except when there are already two strikes. Thus, a foul ball with two strikes leaves the count unchanged. (However, a noted exception to this rule is that a ball bunted foul with two strikes always counts as a strike.) If a pitch is batted foul or fair and a member of the defensive team is able to catch it, before the ball strikes the ground, the batter is declared out. In the event that a bat contacts the ball, but the ball continues sharply and directly to the catcher’s mitt and is caught by the catcher, it is a foul tip, which is same as an ordinary strike.

When three strikes occur on a batter, it is a strikeout and the batter is automatically out unless the pitch is not caught by the catcher or if the pitch bounces before it is caught. It is then ruled a dropped third strike. (This is a violation of the third strike rule.[2]) If the catcher drops the third strike the batter is permitted to attempt to advance to first base. In this case, the batter is not out (although the pitcher is awarded a strikeout). The catcher can try to get the batter out by tagging him with the ball or throwing the ball to first base and forcing him out. (See Doug Eddings/2005 ALCS and Mickey Owen/1941 World Series for famous examples of dropped third strikes that dramatically altered the course of post-season series’.)

On the fourth ball the batter becomes a runner, and is entitled to advance to first base without risk of being put out, called a base on balls or a walk (abbreviated BB). If a pitch touches the batter, the umpire declares a hit by pitch (abbreviated HBP) and the batter is awarded first base, unless the umpire determines that the ball was in the strike zone when it hit the batter, or that the batter did not attempt to avoid being hit. In practice, neither exception is ever called unless the batter obviously tries to get hit by the pitch; even standing still in the box will virtually always be overlooked, and the batter awarded first. If the catcher’s mitt, catcher’s mask, or any part of the catcher comes in contact with the batter and/or the batter’s bat as the batter is attempting to hit a pitch, the batter is awarded first base, ruled “catcher’s interference.”

Baserunning
Main article: Baserunning
Once a batter becomes a runner and reaches first base safely, he is said to be “on” that base until he attempts to advance to the next base, until he is put out, or until the half-inning ends. When comparing two or more runners on the basepaths, the runner farther along is called a lead runner or a preceding runner; the other runner is called a trailing runner or a following runner . Runners on second or third base are considered to be in scoring position since ordinary hits, even singles, will often allow them to score.

A runner legally touching a base is “safe”—he may not be put out. Runners may attempt to advance from base to base at any time (except when the ball is dead), but must attempt to advance when forced–when all previous bases are occupied and the batter becomes a runner. When a ball is hit in the air, a fly ball, and caught by the defending team, runners must return and touch the base they occupied at the time of the pitch—called tagging up—after the ball is first touched. Once they do this, they may attempt to advance at their own risk.

Only one runner may occupy a base at a time; if two runners are touching a base at once, the trailing runner is in jeopardy and will be out if tagged, unless he was forced–in which case the lead runner is out when tagged for failing to reach his force base. Either such occurrence is very rare. Thus, after a play, at most three runners may be on the basepaths, one on each base–first, second, and third. When three runners are on base, this is called bases loaded.

Pick-off attempt on runner (in red) at first baseBaserunners may attempt to advance, or steal a base, while the pitcher is throwing a pitch. The pitcher, in lieu of delivering the pitch, may try to prevent this by throwing the ball to one of the infielders in order to tag the runner; if successful, it is called a pick-off. If the runner attempts to steal the next base but is tagged out before reaching it safely, he is caught stealing. An illegal attempt by the pitcher to deceive a runner, among other pitching violations, is called a balk, allowing the runners to advance one base without risk of being put out.

Another fundamental tenet of the rules of baseball is that a runner originally ruled out can subsequently be ruled safe, but once a runner is ruled safe he cannot be called out on the same play. A runner initially called out can be subsequently ruled safe if the fielder putting the runner out drops the ball (on either a tag or force play), pulls his foot off the base (in the case of a force play), or otherwise illegally obstructs a runner from reaching a base that he otherwise would have reached safely.

Batting and base running strategy
The goal of each batter is to become a base runner himself (by a base hit, a base on balls, being hit by the pitch, a fielding error, or fielder’s choice) or to help move other base runners along (by sacrifice bunt, sacrifice fly, or hit and run).

Batters attempt to “read” pitchers through pre-game preparation by studying the tendencies of pitchers and by talking to other batters that previously faced the pitcher. While batting, batters attempt to “read” pitches by looking for clues that the pitcher or catcher reveal. These clues (also referred to as “tipping pitches”) include movements of the pitchers arms, shoulders, body, etc, or the positioning of the catcher’s feet and glove. Batters can attempt to “read” the spin of a ball early in the pitch to anticipate its trajectory. Batters also remain keenly aware of the count during their at bat. The count is considered to be in the batter’s favor when there are more balls than strikes(e.g.two balls and no strikes). This puts pressure on the pitcher to throw a strike to avoid a walk so the batter is more likely to get an easier pitch to hit and can look for a particular pitch in a particular zone or take a riskier or bigger swing. The count is considered to be in the pitcher’s favor when there are fewer balls than strikes(e.g. no balls and two strikes). This gives the pitcher more freedom to try enticing the batter to swing at a pitch outside the strike zone or throwing a pitch that is harder to control (e.g. a curve, slider or splitter), but that is also harder to hit. Thus the batter will take a more protective swing. A major strategy in batting at competitive levels of baseball is patient hitting. An example of patient hitting is when a batter has a zero strike count the batter will almost always look for his perfect pitch. One strike hitting is very similar to no strike hitting and the batter usually is still looking for a good pitch to hit. Two strike hitting, the strategy is changed where the batter will protect the plate by fouling off pitches until the batter is able to find a pitch to hit. This style of hitting is known as patience at the plate. This style of hitting allows the hitter to look for a good pitch to hit and make the pitcher throw more pitches so that the pitcher will tire out faster. This is critical if the batting team is facing a very skilled pitcher who if allowed to will take over the game with his ability to get batters to do what he wants them to do with the pitches that he makes.

In general, base running is a tactical part of the game requiring good judgment by runners (and their coaches) to assess the risk in attempting to advance. During tag plays, a good slide can affect the outcome of the play. Managers will sometimes simultaneously send a runner and require the batter to swing (a hit-and-run play) in an attempt to advance runners. Often, on a hit-and-run play the batter will try to “hit behind the runner” by hitting the ball to right field which makes it more likely that the runner will be able to make it to third base, thus taking an extra base.

A batter can also attempt to move a baserunner forward by “sacrificing” his at-bat. This can be done by bunting the ball, hitting a fly ball far enough in the air that a baserunner can advance after the catch, or simply making contact with the ball on a hit-and-run play.

During the course of play many offensive and defensive players run close to each other, and during tag plays, the defensive player must touch the offensive player. Although baseball is considered a non-contact sport, a runner may be allowed to make potentially dangerous contact with a fielder as part of an attempt to reach base, unless that fielder is fielding a batted ball. (Noted exceptions to the dangerous contact rule are found throughout amateur competitions, including youth leagues, high school, and college baseball.) A good slide is often more advantageous than such contact, and “malicious” contact by runners is typically prohibited as offensive interference. The most common occurrence of contact of this nature is at home plate between the runner and the catcher, as the catcher is well padded and locked into position that completely blocks home plate from the runner, and the runner will often try to knock the ball out of the catchers hand by running him over. Since the catcher is seen (symbolically and literally) as the last line of defense, it seems natural that the more physical play happens here.

Innings and determining a winner
An inning consists of each team having one turn in the field and one turn to hit, with the visiting team batting before the home team. A standard game lasts nine innings, although some leagues (such as high school baseball and Little League) play fewer. The team with the most runs at the end of the game wins. If the home team is ahead after eight-and-a-half innings have been played, it is declared the winner, and the last half-inning is not played. If the home team is trailing or tied in the ninth inning or beyond and they score to take the lead, the game ends as soon as the winning run touches home plate; however, if the last batter hits a home run to win the game, he and any runners on base are all permitted to score.

If both teams have scored the same number of runs at the end of a regular-length game, a tie is avoided by the addition of extra innings. As many innings as necessary are played until one team has the lead at the end of an inning. Thus, the home team always has a chance to respond if the visiting team scores in the top half of the inning; this gives the home team a small tactical advantage. In theory, a baseball game could go on forever; in practice, however, they eventually end. In addition to that rule, a game might theoretically end if both the home and away team were to run out of players to substitute (See Substitutions). In Major League Baseball the longest game played was a 26-inning affair between the Brooklyn Robins and Boston Braves on May 1, 1920. The game ended in a 1-1 tie called on account of darkness. Two minor-league teams, the Pawtucket Red Sox and Rochester Red Wings, played a 33-inning game in 1981.

In Major League Baseball, games end with tie scores only because conditions have made it impossible to continue play. A tie game does not count as an official game in the standings unless it is finished later or replayed; however, individual player statistics from tie games are counted. Inclement weather may also shorten games, but at least five innings must be played for the game to be considered official; four-and-a-half innings are enough if the home team is ahead. Previously, curfews and the absence of adequate lighting caused more ties and shortened games. Also, with more modern playing surfaces better able to handle light rains, the process for calling or shortening a game due to weather has changed; it is more common than in the past to delay a game as much as 2 hours before a cancellation; also, a delay usually does not occur anymore until the rain is moderate-heavy and/or there is standing water on some part of the playing field.

In Japanese baseball, if the score remains tied after nine innings, up to three extra innings may be played before the game is called a tie. Some youth or amateur leagues will end a game early if one team is ahead by ten or more runs, a practice known as the “mercy rule” or “slaughter rule”. Rarely, a game can also be won or lost by forfeit.

There is a short break between each half-inning during which the new defensive team takes the field and the pitcher warms up. Traditionally, the break between the top half and the bottom half of the seventh inning is known as the seventh-inning stretch. During the “stretch,” fans in the United States often sing the chorus of “Take Me Out to the Ball Game;” since the September 11, 2001 attacks, “God Bless America” has often been added to it.

Substitutions
Each team is allowed to substitute for any player at any time the ball is dead. A batter who replaces another batter is referred to as a pinch hitter; similarly, a pinch runner may be used as a replacement for a baserunner. Any player who replaces another player between innings is known as a “defensive replacement”. Any replacement is a permanent substitution; the replaced player may not return to the game.

It is common for a pitcher to pitch for several innings and then be removed in favor of a relief pitcher. Because pitching is a specialized skill, most pitchers are relatively poor hitters; it is common to substitute for a pitcher when he is due to bat. This pinch hitter is typically then replaced by a relief pitcher when the team returns to the field on defense, but more complicated substitutions are possible, most notably the double switch.

Many amateur leagues allow a starting player who was removed to return to the game in the same position in the batting order under a re-entry rule. Youth leagues often allow free and open substitution to encourage player participation.

A few leagues, notably Major League Baseball’s American League, allow a designated hitter, a player whose sole purpose is to hit when it would normally be the pitcher’s turn. This is not considered a substitution but rather a position, albeit a purely offensive one. A designated hitter does not play in the field on defense and may remain in the game regardless of changes in pitchers. Many baseball traditionalists consider having a designated hitter to be a unequal way to play, as the designated hitter does not field a position.

Rosters
During the course of a game, each baseball team has players that are an active part of the game, called in the game, and players that are not, called on the bench. The players on the bench are needed in case of injuries and to make strategic pitching, fielding, and batting substitutions. To keep the game fair, each team is limited to a fixed number of players.

MLB rosters
The number of players on a roster is dictated by the labor agreements worked out between players and management. According to Major League Baseball, a team may have a maximum of 25 men on a roster from Opening Day until August 31. After that, teams may call up additional personnel, up to a maximum of 40 players on the active roster, with the exception of the postseason, where rosters are fixed at 25 men.

Other personnel
Any baseball game involves one or more umpires, who make rulings on the outcome of each play. At a minimum, one umpire will stand behind the catcher, to have a good view of the strike zone, and call each pitch a ball or a strike. Additional umpires may be stationed near the bases, thus making it easier to see plays in the field. In Major League Baseball, four umpires are used for each game, one near each base. In the all-star game and playoffs, six umpires are used: one at each base and two in the outfield along either foul line.

Hall of Fame Baseball Rosters: Athletics

[affmage source="ebay" results="100"]Athletics Baseball[/affmage]